Mack Titan

Request a Quote

Request a no obligation, free quote on this product from your choice of dealers.

  • Engine: Mack MP10 16 litre, 600Hp – 685Hp (Ref Engine chart), Selective Catalytic Reduction (SCR), Emission Level Euro5 (ADR80-03)
    Fan: 813mm (32”) 11-blade nylon fan
    Radiator: NL1 Heavy Duty, Frontal area 1,757in²
    Exhaust: Single RHS frame mounted catalyst with stainless steel heat shield, Outlet twin 152mm (6”) vertical exhaust (Day Cab/Sleeper Cab), Right hand horizontal outlet exhaust (Day Cab), Exhaust tip height above ground 3.5mtr, Exhaust tip height above ground 4.2mtr (optional)
    Air Intake & Filter: Donaldson 279mm (11”) single dry type element, dual canisters
    mounted under the cab, Painted steel dust extractors (optional) and external air intakes mounted in front of the cabin ‘A’ pillars
    Filters: 2 full flow and 1 bypass engine mounted oil filters, step dual engine mounted fuel filters / water separator
    Air Compressor: Twin cyl 900 litres/min WABCO compressor
  • Type: Eaton 394mm (15.5”) Easy Pedal with VCT Plus, Eaton ‘SOLO’ with VCT Plus (CA), SACHS 430mm (17”) Single Plate (mDRIVE only), Air assist clutch release
  • Transmission: Manual and Automated Manual Transmissions, (Refer Transmission Chart), Transmission oil cooler
    Make: Mack (mDrive)
    Model:ATO3112D
    Max-Torque: Capacity:2,350ft-lbs (600Hp and 685HP)
    FWD Gears:12
    Rev Gears: 2
    LO/HI: 11.73 / 0.78
    Type: Automated Manual
    Make: Eaton
    Model: RTLO-22918B (CA)
    Max Torque Capacity: 2,250ft-lbs (600HP only)
    FWD Gears:18
    Rev Gears: 2
    LO/ HI 14.40 / 0.73 Manual
    PTO Provision: mDRIVE transmission mounted – DIN or Flange (optional), Rear of engine (PTO) – CA, Prep kit, switch, wiring and software (mDRIVE) (optional)
  • Front Axle: Mack FXL with unitised hubs (Refer Steer Axle Chart), Axle position: Mid Axle Forward: 1,058mm Bumper to Front Axle
    Steer Axle: Make: Mack
    Model: FXL 16.5
    Capacity: 16,500lbs (7.5t)
    Suspension: CLX (P3,M8)
    Make: Mack
    Model: FXL 18
    Capacity:18,000lbs (8.2t)
    Suspension: CLX (M7)
    Make: Mack
    Model: FXL 20 (CA)
    Capacity: 20,000lbs (9t)
    Suspension: CLX (P4,H8)
    Note: Parabolic Standard Duty (P), Multileaf Standard Duty (M), Multileaf Heavy Duty (H) - Number = Leaf Qty
  • Rear Axles: Mack, Meritor and Dana axle options (Refer Drive Axle Chart), Ratings 21 to 26 tonne
    Drive Axle: Make: Mack
    Model: S652
    Capacity: 65,000lbs (29t)
    Ratios: 4.36, 4.60
    Suspension: AD260
    Make: Mack
    Model: RTH2610B (Hub Reduction) (CA)
    Capacity: 57,000(26t)
    Ratios: 4.12, 4.55, 5.41
    Suspension: MIL-X
    Make: Mack
    Model: RTH2610B (Hub Reduction)
    Capacity: 57,000lbs (26t) (CA)
    Ratios: 3.76, 4.12, 4.55
    Suspension: MACK Air
    Make: Mack
    Model: NAS369 (tri-drive) (CA)
    Capacity: 69,000lbs (31t)
    Ratios: 5.46
    Suspension: AD369
    Make: Mack
    Model: NAS397 (tri-drive) (CA)
    Capacity: 97,000lbs (44t)
    Ratios: 4.60, 5.22
    Suspension: AD390
    Make: Meritor
    Model: RT52-185
    Capacity: 52,000lbs (24t)
    Ratios: 3.58, 3.73, 3.91, 4.10, 4.30
    Suspension: AD260/ MIL-X
    Make: Dana
    Model: D52-190
    Capacity: 52,000lbs (24t)
    Ratios: 3.58, 3.73, 3.91, 4.10, 4.30, 4.56
    Suspension: AD260
    Make: Sisu
    Model: FR2P32S (CA)
    Capacity: 70,500lbs (32t)
    Ratios:4.68, 5.56
    Suspension: AD260
    Make: Sisu
    Model: FR3P48S (tri-drive) (CA)
    Capacity: 96,000lbs (48t)
    Ratios: 4.68, 5.56
    Suspension: AD390
    Note: Other ratios available via (CA) - Customer Adaptation
  • Inter-axle/ Wheel Locks: DCDL one axle only (vendor axles only), DCDL’s on both axles (optional), Mack Power Divider (standard with Mack axles)
  • Type: 1,321mm (52”) long springs (Refer Steer Axle Chart)
  • Mack, Meritor and Dana axle options (Refer Drive Axle Chart), Ratings 21 to 26 tonne
  • Type: Drum and disc brake options, front and rear automatic slack adjusters, ABS or (optional) ABS with Traction Control, Grade Gripper - hill start assist (standard with mDRIVE), Road Stability Advantage (ESP - Electronic Stability Program)
    – optional
    Engine Break: Advanced PowerLeash engine brake, Engine retarding power up to 570Hp (425kW)
  • Type: Sheppard SD110, Steering ratio 16.9:1, Steering Damper
  • Wheels: 10 stud 8¼” (285mm) PCD steel disc,
    10-stud options:
    8¼” (285mm PCD) machine buff / polished alloy
    or DURABRIGHT alloy disc
    9” (285mm PCD) polished or DURABRIGHT alloy disc
    *335mm PCD options available on selected axle combinations
    Tyres: Bridgestone / Michelin tyres
  • Specs: 26” round alloy tanks (standard) or steel (CA) (Refer Wheelbase Chart), Large capacity D-shaped tanks (optional), Round or D-Shaped stainless steel urea tanks (125, 150 or 200ltr), Stainless steel D tank straps (optional), A variety of tank finishes is available - ask your Authorised Dealer
  • Chassis: Advantage 300mm x 90mm x 9.5mm, 184,000psi/RBM 2,240,000in lb, Advantage 300mm x 90mm x 11.1mm, 212,000psi/RBM 2,590,000in lb, 5mm inner liners available on certain applications
    Afterframe: 1,510mm (59.44”) to 1,550mm (61”), All chassis lengths come with tapered rail ends
    Cab Support: Front: Two metalastic pivot mounts, Rear: Air isolation with dual shock absorbers, Fully suspended cab, Rear panard rod
    Bullbar/ Bumper/ FUPS: Light weight alloy bumper with front underrun protection, Heavy duty bullbar with front underrun protection (optional), Temporary transit FUP device (option)
    Chassis Access Step: Staired and perforated 2 step design (optional)
  • Batteries: Four 12volt Bulldog batteries, high capacity (620 CCA), LH and RH frame mounted with black battery box cover, Polished aluminium battery box cover (optional), Batteries mounted in sleeper if fitted, Stacked battery box (CA)
    Alternator: Leece Neville 12volt/160Amp Brushed, Leece Neville 12volt/160Amp Brushless (optional), Leece Neville 12volt/185Amp Brushless (optional), Leece Neville 12volt/200Amp Brushed (optional)
    Starter Motor: MELCO 12volt electric starter, Key type start & stop
    Headlamps: Hella integral light/indicator unit with polycarbonate lens
  • Wheelbase: Wheel bases can be adapted to suit your application
  • Air Dryer:
    Bendix AD-IS air dryer
    Remote Breathers:
    Transmission, fuel and axle remote breather kit (optional)
    Trailer Connections:
    Trailer - connections back of cab
    Trailer - connections back of cab and rear of frame (optional)
    Air: Service and emergency with blanking plugs
    Electrical: 12volt 7-pin female base with HD 5mm² cabling
    Telematics:
    Mack telematics system - speak with your Authorised Dealer for further information.
    Shell:
    Fusion Cab, ECE29 (cab strength test) compliant, Two piece windscreen
    Sleeper Options:
    710mm (28”) Super Cab with rear cabin extension
    911mm (36”) High-rise premium sleeper - 4 door
    1,015mm (40”) Mid-rise premium sleeper – 4 door
    1,170mm (46”) Mid-rise premium sleeper – 4 door
    1,320mm (52”) Mid-rise premium sleeper – 4 door
    1,320mm (52”) High-rise premium sleeper – 4 door
    1,520mm (60”) Mid-rise premium sleeper - 3 door
    All standard sleepers have 4 access door and vertical cab extenders
    * Note additional sleeper options are available, speak with your Authorised Dealer.
    Cab Interior:
    Overhead storage (up to 3 pockets based on cab configuration), Rear Wall storage available (based on cab configuration), Door Storage (2 pockets), Cup Holders in dash, Centre storage console (available based on cab configuration), Interior Trim - pleated ultra leather, Central locking available, Power windows available, Self cancelling signals available (optional), Internal grab handles, Speak with your Authorised Dealer for all options
    Seats:
    Driver: ISRI ‘Big-Boy’ air-ride Premium: ‘MACK’ embossed cloth trim, LH arm rest, upper, side and lower lumbar support with oscillating base and fore/aft seat cushion adjustment
    Driver: ISRI ‘Big-Boy’ air-ride (optional): cloth trim, upper, side and lower lumbar support with fore/aft seat cushion adjustment
    Passenger: ISRI fixed cushion
    Passenger: ISRI premium air ride seat with upper and lower lumbar support, and fore/aft seat cushion adjustment (optional)
    Steering Wheel:
    Bulldog soft touch rubber grip 457mm (18”) diameter, Elite leather grip steering wheel (optional)
    Adjustable tilt and telescopic steering column
    Instrument:
    Driver information display – Co-Pilot, Speedometer/odometer (electronic), Tachometer/hourmeter (electronic), Voltmeter, engine hours, distance, trip recording, Engine coolant temperature, fuel and AdBlue levels, Primary and secondary air pressure, Oil pressure and oil temperature
    Full Gauge Package:
    Manifold pressure, transmission temperature, exhaust temperature, brake application pressure, front and rear drive axle temperature
    Windscreen Wipers:
    Electronic variable-speed, intermittent wipers with washer, Reservoir mounted under bonnet
    Audio System:
    Premium Radio/CD player including Bluetooth, iPod connector and USB connector
    Communications:
    GME CB radio (optional), GME UHF radio (optional)
    Climate Control:
    HVAC integral cab air conditioner/heater, Electronic controls, Replaceable dust intrusion filter
    Safety & Warning:
    Set of 3 safety warning triangles, Door mounted emergency procedure guide (optional), Emergency eye wash bottle (optional), 2.5kg in cab mounted fire extinguisher (optional), Fresnel Lens (optional)
    Cab Exterior:
    Fibreglass bonnet and polyfibre fenders with splash aprons, Bonnet tilts forward with spring assist, Chrome Grille surround and side air intakes, Polished stainless steel cab skirts and air intake tubes, Black nylon bonnet hold down straps, Bright finish bonnet hold down straps (optional), Stainless bug screen integrated with grille, Painted external sunvisor, Stainless steel exterior sunvisor (optional)
    Horns:
    2 x roof mounted, air horn trumpets, 2 x under bonnet mounted, electric
    Mirrors:
    Heated ‘West Coast’ mirrors with stainless steel arms, LH and RH power mirrors (standard), LH and RH 7” spotter mirrors (standard), LH down mirror (optional)
    Windscreen Stone Guard:
    Matt black mesh windscreen stone guard (optional)
    Paint Type & Colour:
    Cab/sleeper: Single non-metallic cab colour (Incredible white standard), Chassis: Single non-metallic chassis colour (black standard), Epoxy Mine specification primer (CA)
    Accessories:
    Additional factory fitted accessories are available, All customers are encouraged to speak with your Authorised Dealer for full details
    * Subject to conditions:
    Refer to your authorised Mack Dealer for:
    Detailed information
    Full Warranty details and limitations.
    Further details regarding the mass of options.
    The latest details on specifications, options, prices and availability.

Request Quote

You might be interested in...